Products
Your position ：Home >> Products >>
Technical Parameters
Side Type of EDT Series Hydraulic Breaker
| Model | Unit | EDT 400 | EDT 800 | EDT 2000 | EDT 2100 | EDT 2200 | EDT2200A | EDT 3000 | EDT 3200 | EDT 3500 | EDT 4500 |
| Body Weight (Kg) | kg | 151 | 471 | 820 | 840 | 911 | 929 | 1410 | - | 1443 | - |
| Total weight(Kg) | kg | 250 | 765 | 1740 | 1575 | 1850 | 1868 | 2420 | 2413 | 2570 | 3788 |
| Length(mm) (side type) | mm | 1330 | 1939 | 2327 | 2471 | 2414 | 2414 | 2500 | 2776 | 2816 | 3189 |
| Width(mm) (side type) | mm | 235 | 450 | 560 | 560 | 560 | 560 | 635 | 610 | 635 | 665 |
| Operating pressure (kg/cm2) | kg/cm2 | 110-140 | 150-170 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 |
| Hydraulic flow range(l/min) | l/min | 40-70 | 80-110 | 130-150 | 120-150 | 120-180 | 120-180 | 150-190 | 180-240 | 200-260 | 210-290 |
| Impact frequency(bpm) | b/min | 500-900 | 350-700 | 400-800 | 325-410 | 350-500 | 350-500 | 350-700 | 300-450 | 250-400 | 200-350 |
| Diammeter of hose(inch) | inch | 1/2 | 3/4 | 1 | 1 | 1 | 1 | 1-1/4 | 1-1/4 | 1-1/4 | 1-1/4 |
| Diammeter of tool(Moil/Chisel/Blunt) | mm | 68 | 100 | 135 | 138 | 140 | 140 | 150 | 155 | 165 | 175 |
| Weight of Tool(kg) | kg | 18 | 54 | 115 | 120 | 126 | 126 | 155 | 182 | 205 | 247 |
| applicable excavator bucket volume(m3) | m3 | 0.15-0.3 | 0.4-0.6 | 0.6-0.8 | 0.6-0.8 | 0.7-0.9 | 0.7-0.9 | 0.9-1.2 | 1.1-1.4 | 1.2-1.7 | 1.4-2.0 |
| applicable excavator weight(ton) | ton | 4-7 | 10-15 | 18-26 | 18-26 | 18-26 | 18-26 | 27-35 | 28-35 | 30-45 | 40-55 |
Top Type of EDT Series Hydraulic Breaker
| Model | Unit | EDT 400 | EDT 800 | EDT 2000 | EDT 2100 | EDT 2200 | EDT 2200A | EDT 3000 | EDT 3200 | EDT 3500 | EDT 4500 |
| Body Weight (Kg) | kg | 151 | 471 | 820 | 840 | 911 | 929 | 1410 | - | 1443 | - |
| Total weight(Kg) | kg | 298 | 890 | 1754 | 1750 | 1850 | 1868 | 2420 | 2555 | 3065 | 3909 |
| Length(mm) (Top type) | mm | 1373 | 2251 | 2327 | 2471 | 2823 | 2823 | 3047 | 3119 | 3359 | 3617 |
| Width(mm) (Top type) | mm | 350 | 438 | 580 | 580 | 620 | 620 | 700 | 710 | 710 | 760 |
| Operating pressure (kg/cm2) | kg/cm2 | 110-140 | 150-170 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 |
| Hydraulic flow range(l/min) | l/min | 40-70 | 80-110 | 130-150 | 120-150 | 120-180 | 120-180 | 150-190 | 180-240 | 200-260 | 210-290 |
| Impact frequency(bpm) | b/min | 500-900 | 350-700 | 400-800 | 325-410 | 350-500 | 350-500 | 350-700 | 300-450 | 250-400 | 200-350 |
| Diammeter of hose(inch) | inch | 1/2 | 3/4 | 1 | 1 | 1 | 1 | 1-1/4 | 1-1/4 | 1-1/4 | 1-1/4 |
| Diammeter of tool(Moil/Chisel/Blunt) | mm | 68 | 100 | 135 | 138 | 140 | 140 | 150 | 155 | 165 | 175 |
| Weight of Tool(kg) | kg | 18 | 54 | 115 | 120 | 126 | 126 | 155 | 182 | 205 | 247 |
| applicable excavator bucket volume(m3) | m3 | 0.15-0.3 | 0.4-0.6 | 0.6-0.8 | 0.6-0.8 | 0.7-0.9 | 0.7-0.9 | 0.9-1.2 | 1.1-1.4 | 1.2-1.7 | 1.4-2.0 |
| applicable excavator weight(ton) | ton | 4-7 | 10-15 | 18-26 | 18-26 | 18-26 | 18-26 | 27-35 | 28-35 | 30-45 | 40-55 |
| Note | The diameter of drill rod is only for reference.During operation the drill rod adopts decreased tolerance,and its size will be slightly smaller than the reference size.But this cannot affect product quality and its use. | ||||||||||